As a longtime fan of neutral tones like black, white, gray, and natural shades in my home, I occasionally crave a bold accent wall with a sophisticated glam effect. When I discovered Smartdeco's metallic velvet stucco—a premium wall finish from my go-to beton ciré supplier—I was hooked. Having tackled numerous DIY projects with their products, including refinished windowsills and a concrete-look dining table, I knew the quality was top-notch. Here's my step-by-step guide to applying this metallic stucco, complete with real-world results from my rose gold accent wall in the office.
Table of contents
I've trusted Smartdeco for years, using their materials on projects like my refurbished windowsills and concrete ciré dining table. These jobs are thrilling to start and always deliver satisfying results. This time, I chose their metallic stucco—a luxurious paste-like wall finish that's easier to apply than standard paint while offering superior shimmer and depth.
You can find the metallic velvet from Smartdeco here.
While I usually stick to neutrals, I selected metallic velvet rosé (rose gold) for a fresh twist. Choosing was tough—all their metallic shades, from silver and blue to anthracite and copper, boast the same elegant velvet sheen. I ordered samples to decide, opting for the softer rose gold over ubiquitous metallics. It delivers subtle intensity with that signature luster.
This isn't ordinary paint; it's a spreadable paste that's surprisingly user-friendly. Start with a clean, dry, crack-free wall. Mine had minor fissures, which I repaired using Brander Reno Filler (a powdered stucco recommended by my plasterer), sanded smooth, and prepped.
For newly plastered walls, sand thoroughly and apply primer to reduce absorbency, just like with regular paint.
Use the matching metallic velvet color primer, available from Smartdeco. I applied it with a brush to avoid drips—it's thin, so rollers can be messy. Let it dry 30 minutes to 3 hours.
Then, apply the metallic stucco with a flexible trowel. Stir the bucket first (habit from past projects), scoop with a putty knife, and spread in semicircular motions: horizontal crescents followed by vertical passes. It glides on smoothly, instantly revealing a velvet-like shimmer reminiscent of luxurious upholstery.
One layer provides good coverage but two ensure opacity. Allow 2 hours drying between coats. The paste is forgiving—if a grain causes a mark while wet, smooth it over from another angle.
I was apprehensive, but it was simpler than beton ciré on my previous projects. Corrections are easy while wet, yielding a flawless, shiny finish. Finish with a baseboard and radiator covers for a polished look.
