Before
After
Updating your entryway doesn't have to mean repainting your front door. For a reversible, pattern-rich alternative to paint, peel-and-stick vinyl wallpaper delivers professional results at a fraction of the cost. With countless designs available, it's a go-to solution I've used successfully in countless home projects.
Start by removing the doorknob and all hardware. Thoroughly clean and dry the door surface to eliminate dirt, fingerprints, and dust for optimal adhesion.
Measure the door's width and height to calculate the number of wallpaper strips needed (typically 2-3, based on roll width). Account for slight overlaps. For patterned wallpaper, note the repeat distance.
Cut strips from the roll, adding at least 1/2-inch excess at top and bottom to trim later after application.
Peel the backing from one end and align flush with the door's edge. Let gravity guide you, working top to bottom (Image 1). Smooth bubbles with the spine of a hardcover book as you peel slowly.
This material is remarkably forgiving—if misaligned or bubbly, simply peel off and reposition without damage (Image 2).
For stubborn small bubbles, prick with a sewing needle to release air. Test in a hidden spot first; the tiny holes vanish once smoothed.
Continue top to bottom, aligning patterns seamlessly to hide seams for a pro finish.
At hinges, trim vinyl with a utility blade (Image 1). Cut out knob and latch holes (Image 2). Slice off top and bottom overhangs cleanly—avoid folding unless adhesion is perfect.
Replace hardware—or upgrade for a fresh look.
