Break the tiles into manageable pieces with a hammer. Be sure to break off the bottom of the tile so you don't scratch the surface.
Sort and arrange your favorite tiles before spreading the putty on the table.
Using a 3/16” trowel, spread the putty on the table, work in small sections to prevent drying, and start laying the tiles (Image 1). Be sure to apply a little pressure to set the tiles. Use tile nippers to trim the tiles to fit as needed (Image 2).
After letting the tiles dry, spread the grout between the tiles and wipe up any excess grout with a sponge. Let the tiles dry for 24 hours and then mix and pour epoxy all over the table. Let stand another 24 hours..
