Plug-in sconces offer ultimate flexibility, plugging directly into any outlet without hardwiring. As a seasoned DIY crafter with years of custom lighting projects, I recommend a low-wattage bulb for this accent light to ensure safe heat dissipation inside the vase.
Start with a sleek silver metal vase. Drill a central hole sized for the power cable, plus at least three smaller surrounding holes for ventilation to prevent overheating.
Cut the cable to your preferred length—opt for slightly longer since it plugs into a wall outlet.
Attach the wire to the plant hanger using twist ties or matching electrical tape. Leave ample slack to thread through the vase and connect components easily.
Measure the chain links required to link the plant hanger to the vase. Secure an anchor chain inside by bending it firmly with pliers for stability.
Connect the cable to the socket: Strip both wire ends. Attach the neutral (ridged insulation) to the silver terminal and the hot wire to the brass. Thread the cable through the socket cap, position on the fixture, then snap the insulating boot and housing into place.
Install the plug at one end and an inline switch near the bedside on the cord, per the package instructions.
